SenTech STC-GE83A Manuale Utente Pagina 15

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 24
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 14
STC-GE Series
Product Specifications 15 Rev 3.01
Product
STC-GEC202A
STC-GE202A
Mechanical
Specifications
Dimensions
35 (W) x 35 (H) x 50.6 (D) mm excluding connectors
Optical Filter
IR cut filter on
No filter
Optical Center Accuracy
Positional accuracy in H and V directions: +/- 0.3 mm
Rotational accuracy of H and V: +/- 1.5 deg.
Material
Aluminum (AC)
Lens Mount
C mount
Connectors
RJ45 connector
Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
DC IRIS lens connector: M1951 (EMUDEN) or equivalent
Camera Mount Screws
Two 1/4 Tripod screw holes: (One on each top and bottom plate),
Twelve M4 screws holes: (Four on each top and bottom plate, two on each side plate)
Weight
Approximately 120 g
Environmental
Specifications
Operational
Temperature
Minimum
Environmental Temperature -5C
Maximum
Camera housing temperature (top plate) shall not exceed 65C
(This corresponds to an environmental temperature of approximately 35C)
Storage temperature
Environmental Temperature: -30⁰C to 65⁰C
Vibration
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011
RoHS
RoHS Compliant
Note: Please use this camera in surrounding temperature conditions that are less than 35C or in conditions where the
camera’s top case plate is less than 65C.
When the camera is used in surrounding temperatures that exceed 35C, please make sure that the camera is set
up to properly radiate heat (maintaining the camera’s top case plate’s temperature to be less than 65C).
Taking these steps will maintain the heat rating of the electronic components of the camera.
Vedere la pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Commenti su questo manuale

Nessun commento